5 things you should do if you want to make sure that the wood is straight

1. Make two lists.

Each 500 mm long of 45 mm wide 25 mm thick.
Lists must be absolutely straight and even. Make sure that they are branches of witout material.
These lists of wood can become one of its most important tools in your workshop.

2 Lists position lay their lists in front of the direction of the wood in his work. One at each end. This will provide two reference points.

3. The measure take a couple of steps back and purpose. Two lists should appear in parallel if they do, then the piece is correct. Congratulations! This is what he wants. Unfortunately it is not always the caso-si is not straight skip to step 4.

4 Check if the wood is not straight to take a pencile and mark where the wood is high. Then, scrubb down. Important note, however, did not do too much at the same time remvoe. It is better to go slowly and then end up taking the hole piece renderd useless due to the human being rushed.

5 Check the last and most important step is check again. Repeat step 3 to 5 until you are completely satisfied.

It is when the right so that it knows which side is directly turn the piece and that the process of drill on the other side.

PS. If you really want to build great mobile: remove http://www.build-classic-furniture.com is an article of "shareware" (what is it?) (read on...)

This article is shareware. Give this article away free on the site, or included as part of any package paid to all the article has remained intact, including this notice. Copyright © 2006 Stian Kjellhov